Setting Up
Setting Up and Placing a Call
4-74
Configure your external device. Then, use the Call Setup screen to:
Look up the desired telephone number
Dial a call
Disconnect a call
Procedure
1. Follow this menu selection sequence:
Main
Control
2. The Control menu appears. Select Call Setup and press Return.
3. The Call Setup screen appears. Enter the number of the directory containing
the desired telephone number in the Directory Number field. The telephone
number appears in the Directory Phone Number field. See
Directory Numbers
and
Troubleshooting and Maintenance , for information about the call directory.
4. Select Dial and press the Enter key to initiate dialing.
5. To end the call, select Disconnect and press the Enter key.
September 1997
Call Setup
Changing Directory Numbers
Displaying
in Chapter 5,
9161-A2-GH30-20