Monitoring The Dsu/Csu; What To Monitor - Paradyne 7110 User Manual

Monitoring the DSU/CSU

What to Monitor

7110-A2-GB20-00
This chapter presents information on how to access and monitor DSU/CSU status
and performance statistics on the T1 network. You can monitor DSU/CSU
operations by viewing:
System and Test Status screen
Highest priority Health and Status message on the last line of all screens
Cross Connect Status screen
Network Performance Statistics screen
LEDs on the ATI Status screen or the DSU/CSU's front panel
NMS via SNMP MIB objects
Refer to MIB Descriptions
DSU/CSU.
The following table shows the available indicators of alarm conditions on the
network interface and the User Data port.
Table 4-1. Alarm Indicator Locations
Alarm Condition
Loss of Signal (LOS)
Out of Frame (OOF)
Alarm Indication Signal (AIS)
Excessive Error Rate (EER)
Yellow
June 1997
, Appendix C, for the SNMP MIBs supported by the
Status Network
Screen LED
Y SIG
Y OOF
Y
Y EER
Y
4
Port
LED
RXD
4-1