Monitoring The Dsu; What To Monitor; Dsu Leds - Paradyne 7610 User Manual

Monitoring the DSU

What to Monitor

DSU LEDs

7610-A2-GB20-00
This chapter presents information on how to access and monitor DSU status and
performance statistics on the DDS network. You can monitor DSU operations by
viewing:
LEDs on the ATI Status screen or the DSU's front panel
Unit Status screen on the ATI
Highest priority Health and Status message displays on the right on the last
line of all screens.
Network Interface Status screen on the ATI
Network Performance Statistics screen on the ATI
NMS via SNMP MIB objects
Refer to MIB Descriptions
DSU.
The DSU LEDs can be viewed on the Display LEDs Status screen. This ATI
status screen is available locally and remotely.
The 12 LEDs are organized in three groups:
System LEDs display the status of the unit
Network LEDs provide the status of the network interface
Port LEDs display the activity on the user data (DTE) port
To view the LED status screen, follow this menu selection sequence:
Main Menu Status
November 1996
, Appendix C, for the SNMP MIBs supported by the
Display LEDs
6
6-1