Ds1 Near End Group Configuration Table Objects - Paradyne 7110 User Manual

MIB Descriptions

DS1 Near End Group Configuration Table Objects

C-16
The DS1 Near End Group Configuration Table Objects contains configuration
options for the DS1/E1 interfaces. Clarification for objects contained in this table
as it applies to the unit is provided below.
Table C-7. DS1 Near End Group Configuration Table Objects (1 of 5)
Object, OID, Access
dsx1TimeElapsed
(dsx1ConfigEntry 3 )
1.3.6.1.2.1.1.10.18.6.1.3
read-only
dsx1ValidIntervals
(dsx1ConfigEntry 4 )
1.3.6.1.2.1.1.10.18.6.1.4
read-only
dsx1LineType
(dsx1ConfigEntry 5 )
1.3.6.1.2.1.1.10.18.6.1.5
read-write
dsx1LineCoding
(dsx1ConfigEntry 6 )
1.3.6.1.2.1.1.10.18.6.1.6
read-write
June 1997
Description
The number of seconds
that have elapsed since the
start of the current
error-measurement period.
Applies to the T1 network
interface only.
Contains the number of
previous intervals for which
valid data was collected.
Applies to the T1 network
interface only.
Corresponds to the network
framing configuration option
for the network interface on
the DSU/CSU.
Corresponds to the network
line coding configuration
option for the network
interface on the DSU/CSU.
Setting/Contents
Supports the following
values:
0 to 899.
Supports the following
values:
0 to 96.
The value is 96 unless the
interface was brought online
within the last 24 hours, in
which case the value will be
the number of complete
15 minute intervals since the
interface has been online.
Supports the following
values:
dsx1ESF(2) – Indicates
ESF framing.
dsx1D4(2) – Indicates D4
framing.
Supports the following
values:
dsx1B8ZS(2) – Indicates
B8ZS line coding.
dsx1AMI(5) – Indicates
AMI line coding.
7110-A2-GB20-00