Paradyne 7110 User Manual page 125

MIB Descriptions
Transmission Group
C-14
Objects in the Transmission Group are supported on the T1 network interface,
User Data port, Management port, and Terminal port. These objects are defined
through other Internet-standard MIB definitions rather than within MIB II.
Table C-6. Transmission Group Objects
Object Description
rs232 Supported on the User Data port, Management port, and
( transmission 33 ) Terminal port. Defined by the RS-232-like MIB (RFC 1659).
1.3.6.1.2.1.10.33
ds1 (transmission 18 )
Supported on the network T1 interface. Defined by the DS1/E1
MIB.
1.3.6.1.2.1.10.18
Do not specify the following read-only objects in the Set PDU
used to add a route:
June 1997
ipRouteNextHop – Defaults to 0.0.0.0.
ipRouteProto – Set to netmgmt(3) by the software. May
have the following values:
– other(1) – Temporary route added by IP.
– local(2) – Route added or changed due to User
configuration.
– netmgmt(3) – Route added or changed by SNMP set.
– icmp(4) – Route added or changed by ICMP.
– rip(8) – Route added or changed by RIP (or similar
proprietary protocol).
ipRouteAge – Reflects the value of the time-to-live for the
route (in seconds). Defaults to 999 (permanent route).
7110-A2-GB20-00