Assigning Ds0 Channels To The Data Port; Displaying Ds0 Channel Assignments - Paradyne 7110 User Manual

Assigning DS0 Channels to the Data Port

Displaying DS0 Channel Assignments

7110-A2-GB20-00
The DSU/CSU provides Cross Connect configuration options that allow you to do
the following:
Display network DS0 channels assigned to the data port.
Allocate network DS0 channels to the data port.
Clear (unassign) all DS0 channels from the data port interface.
The DSU/CSU's default configuration has all DS0 channels assigned to the data
port.
To access the Cross Connect Assignments screen, follow this menu selection
sequence:
Main Menu Configuration (Load Configuration From)
Cross Connect Assignments
main/config/cross_connect
Device Name:
Assign To:
Assign By:
DS0s to Allocate: 1
N01 N02 N03
P P Available Available P
N09 N10 N11
Available Available Available Available Available Available Available Available
N17 N18 N19
Available Available Available Available Available Available Available Available
–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl–a to access these functions, ESC for previous menu
Save
Select: Block, ACAMI, Channel.
Use the Cross Connect Assignments screen to view which DS0 channels are
currently assigned to the data port. Below each DS0 channel you will see either
"Available" or "P". DS0's with a "P" designation are assigned to the data port.
DS0's marked "Available" are unused (unassigned).
Cross Connect Assignments may also be displayed by accessing the Cross
Connect Status screen under the Status branch of the Main Menu.
June 1997
CROSS CONNECT ASSIGNMENTS
Network Port Rate (Kbps): 0
Block
N04 N05
N12 N13
N20 N21
Customizing the DSU/CSU
Model: 7110
N06 N07 N08
P P P
N14 N15 N16
N22 N23 N24
MainMenu Exit
3-5