Mib Ii - Rfc 1213 And Rfc 1573; Overview - Paradyne 7110 User Manual

MIB Descriptions

Overview

The MIB descriptions listed here provide clarification for the MIB objects when it
is not clear how the object definition in the applicable RFC is related to the unit.
Otherwise, the MIB object is supported as documented in the RFC. The following
sections clarify the information accessed when these objects are used.
MIB II – RFC 1213 and RFC 1573
The unit supports the following MIB II object groups as defined in RFC 1213 and
RFC 1573:
7110-A2-GB20-00
System Group Objects, Table C-1
Interfaces Group Objects – Supported for the T1 network interface, User
Data (DTE) port, Terminal port, Management port, and the FDL as defined in
RFC 1573, the Evolution of the Interfaces Group.
— Interfaces Group Objects, Table C-2
— Extension to Interface Table
— Interface Stack Group
IP Group Objects, Table C-5
ICMP (Internet Control Management Protocol) Group
TCP (Transmission Control Protocol) Group
UDP ( User Datagram Protocol ) Group
Transmission Group Objects, Table C-6 – Supported on the T1 network
interface using the DS1/E1 Enterprise MIB. Supported on the User Data
(DTE) port, Terminal port, and Management port using the RS-232-like MIB.
SNMP Group
June 1997
(ifXTable), Table C-3
Objects, Table C-4
C
C-1