Cross Connect Assignments - Paradyne 7110 User Manual

Cross Connect Assignments

7110-A2-GB20-00
For Cross Connect Assignment Options, refer to Table A-3. To access the Cross
Connect Assignments screen, follow this menu selection sequence:
Main Menu Configuration
Cross Connect
Table A-3. Cross Connect Assignments (1 of 2)
Assign By
Available Settings: Block, ACAMI, Channel
Default Setting: Block
Specifies the method for assigning the synchronous data port's DS0 channels to the
network interface.
Block – Allocates DS0 channels by the block method.
ACAMI – Allocates DS0 channels by the Alternate Channel Alternate Mark Inversion
method. The difference between block and ACAMI is that the number of channels
allocated with ACAMI is double the number needed for the port rate. With ACAMI, every
alternate DS0 channel does not carry data from the port but always transmits and
receives all ones.
Channel – Allocates DS0 channels by the individual channel method.
NOTE: Changing this configuration option from one method to another (Block,
ACAMI, or Channel) deallocates all DS0 channels assigned to the network
interface.
Port Rate
Available Settings: 64, 128, 192, 256, 320, 384, 448, 512, 576, 640, 704, 768, 832, 896,
960, 1024, 1088, 1152, 1216, 1280, 1344, 1408, 1472, 1536
OR
56, 112, 168, 224, 280, 336, 392, 448, 504, 560, 616, 672, 728, 784,
840, 896, 952, 1008, 1064, 1120, 1176, 1232, 1288, 1344
Default Setting: 64
Designates the data rate for the synchronous data port. Available selections depend on
the current base rate configured for the data port. The factory default for Nx64 is
64 kbps, and for Nx56 it is 56 kbps.
NOTES: – This selection is not available if the individual channel allocation method
(Channel) is selected using the Assign By field.
– Changing this selection from one rate to another deallocates all DS0
channels assigned to the network interface.
June 1997
Configuration Option Tables
Load Configuration From
A-7