General Snmp Management Options - Paradyne 7110 User Manual

Configuration Option Tables

General SNMP Management Options

A-24
Table A-10. Communication Protocol Options (3 of 3)
Management Port Alternate IP Address
Possible Settings: 000.000.000.000 – 223.255.255.255, Clear
Default Setting: 000.000.000.000
IP address to use when a call is initiated using the Alternate Directory Phone Number. If
this address is all zeros, the Management Port IP Address is used.
000.000.000.000 – 223.255.255.255 – Sets the alternate Management port IP address.
The range for the first byte is 000 to 223, with the exception of 127. The range for the
remaining three bytes is 000 to 255.
Clear – Clears the IP address and sets to all zeros.
Management Port Alternate Subnet Mask
Possible Settings: 000.000.000.000 – 255.255.255.255, Clear
Default Setting: 000.000.000.000
Specifies the alternate subnet mask used to access the Management port. Used with
the previous option, Alternate Management Port IP Address.
000.000.000.000 – 255.255.255.255 – Sets the management port alternate subnet
mask. The range for each byte is 000 to 255.
Clear – Clears the alternate subnet mask and sets to all zeros. The device creates a
default alternate subnet mask based on the class of IP address:
– Class A defaults to 255.000.000.000
– Class B defaults to 255.255.000.000
– Class C defaults to 255.255.255.000
To access the General SNMP Management Options screen, follow this menu
selection sequence:
Main Menu Configuration
SNMP & Communication
Table A-11. General SNMP Management Options (1 of 2)
SNMP Management
Possible Settings: Enable, Disable
Default Setting: Disable
Specifies if the DSU/CSU can be managed by an SNMP NMS or send out SNMP traps.
Enable – Enables SNMP management.
Disable – DSU/CSU does not respond to SNMP messages or send out SNMP traps.
June 1997
Load Configuration From
General SNMP Management
7110-A2-GB20-00