Paradyne 7110 User Manual page 129

MIB Descriptions
C-18
Table C-7. DS1 Near End Group Configuration Table Objects (3 of 5)
Object, OID, Access
dsx1LoopbackConfig
(dsx1ConfigEntry 9 )
1.3.6.1.2.1.1.10.18.6.1.9
read-write
June 1997
Description
This object specifies the
loopback state of the
network interface.
Applies to the T1 network
interface only.
Setting/Contents
Supports the following
values:
dsx1NoLoop(1) – The T1
interface is not in a
loopback state.
dsx1PayloadLoop(2) –
Specifies that a Payload
Loopback (PLB) is active
for the network interface.
dsx1LineLoop(3) –
Specifies that a Line
Loopback (LLB) is active
for the network interface.
dsx1OtherLoop(4) –
Specifies that an
unspecified type of
loopback is active for the
network interface.
7110-A2-GB20-00