Clearing Ds0 Channel Assignments - Paradyne 7110 User Manual

Clearing DS0 Channel Assignments

7110-A2-GB20-00
4. The port rate increases as the port is assigned to each additional DS0
channel. For example, if two DS0 channels (at 64 kbps each) are assigned to
the data port, a port rate of 128 kbps is required.
5. Select Ctrl-a and then Save to save your changes.
You can clear (deallocate) all the DS0 channels currently allocated to network
interface.
Procedure
To clear DS0 channel allocation:
1. Access the Cross Connect Assignments screen by following this menu
selection sequence:
Main Menu Configuration (Load Configuration From)
Cross Connect Assignments
2. Select Ctrl-a and then ClrAssign.
3. Press Enter to clear the specified DS0 channels.
June 1997
Customizing the DSU/CSU
3-7