Ip Group - Paradyne 7110 User Manual

IP Group

The Internet Protocol Group objects are supported by the unit for all data paths
that are currently configured to carry IP data to/from the unit. All of the objects in
the IP Group, except for the IP Address Translation table, are fully supported.
The following table provides clarification for objects contained in the IP group
when it is not clear how the object definition in MIB II is supported by the unit.
7110-A2-GB20-00
Table C-5. IP Group Objects (1 of 3)
Object, OID, Access Description
ipForwarding (ip1) Specifies whether the unit
is acting as an IP gateway
1.3.6.1.2.1.4.1
for forwarding of datagram
read-write
received by, but not
addressed to, the unit.
ipAddrTable (ip20) The address table.
1.3.6.1.2.1.4.20
read-only
ipAdEntAddr An IP address supported by
(ipAddrEntry 1)
the unit which serves as an
index to the address table.
1.3.6.1.2.1.4.20.1.1
read-only
ipAdEntIfIndex If this object has a greater
(ipAddrEntry 2) value than the ifNumber,
then it refers to a
1.3.6.1.2.1.4.20.1.2
proprietary interface not
read-only
currently implemented by
the MIB II Interface Group.
June 1997
MIB Descriptions
Setting/Contents
Supports only the following
value:
forwarding(1) – The unit is
acting as a gateway.
Supported.
Indexes for tables must be
unique. Therefore, only one
ifIndex can be displayed for each
IP address supported by the
device. If the same IP address is
configured for multiple interfaces,
or for default IP addresses, the
ipAddrTable will not display all of
the interfaces that support a
particular IP address.
None
C-11