Mib Ii Object Groups; System Group - Paradyne 7110 User Manual

MIB II Object Groups

System Group

System Group objects are fully supported by the unit.
7110-A2-GB20-00
Table C-1. System Group Objects
Object, OID, Access Description
sysDescr ( system 1) Provides a full name and
version identification for the
1.3.6.1.2.1.1.1
system's hardware and
read-only
software.
sysObjectID ( system 2) Identifies the network
management subsystem.
1.3.6.1.2.1.1.2
read-only
sysContact (system 4) Provides the textual
identification of the contact
1.3.6.1.2.1.1.4
person for this managed
read-write
unit.
sysName (system 5) Provides an
administratively-assigned
1.3.6.1.2.1.1.5
name for this managed unit.
read-write
sysLocation (system 6) Provides the physical location
for this managed unit.
1.3.6.1.2.1.1.6
read-write
sysServices ( system 7) Functionality supported:
1.3.6.1.2.1.1.7
read-only
1
The unit supports a 127-character string for this object. An error message is sent to
the NMS if an attempt is made to write (set) more than 127 characters.
June 1997
1
1
1
physical (1 ) – Layer 1
functionality for all
interfaces.
datalink/subnetwork ( 2 )
– Layer 2 functionality
( SLIP/ PPP ) for all
management links.
internet ( 4 ) – Layer 3
functionality ( IP ) for all
management links.
end-to-end ( 8 ) – Layer 4
functionality ( TCP/ UDP )
for all management links.
MIB Descriptions
Setting/Contents
PARADYNE T1 DSU/CSU ;
Model: 7110- xx - xxx ;
S/W Release: yy.yy.yy;
H/W CCA number: zzzz-zzz;
Serial number: sssssss
1.3.6.1.4.1.1795.1.14.2.5.2.1
ASCII character string, as set
by the user.
ASCII character string, as set
by the user.
ASCII character string, as set
by the user.
Object is set to 1+2+4+8 (15).
C-3