User Interface Options Menu; Terminal Port Options - Paradyne 7110 User Manual

Configuration Option Tables

User Interface Options Menu

Terminal Port Options

A-12
The User Interface Options Menu includes the following:
Terminal Port Options, Table A-5
Management Port Options, Table A-6
External Device Options, Table A-7
Telnet Session Options, Table A-8
To access the Terminal Port Options screen, follow this menu selection sequence:
Main Menu Configuration
User Interface Terminal Port
Table A-5. Terminal Port Options (1 of 3)
Data Rate (Kbps)
Possible Settings: 2.4, 4.8, 9.6, 14.4, 19.2, 28.8, 38.4
Default Setting: 9.6
Data rate in kbps on the Terminal port.
2.4 to 38.4 – Selects a Terminal port data rate from 2.4 to 38.4 kbps.
Character Length
Possible Settings: 7, 8
Default Setting: 8
Specifies the number of bits needed to represent one character, including the parity bit.
7 or 8 – Sets the bits per character.
Parity
Possible Settings: None, Even, Odd
Default Setting: None
Specifies Parity for the Terminal port.
None – Provides no parity.
Even – Parity is even.
Odd – Parity is odd.
Stop Bits
Possible Settings: 1, 2
Default Setting: 1
Provides the number of stop bits for the Terminal port.
1 or 2 – Selects the number of stop bits.
June 1997
Load Configuration From
7110-A2-GB20-00