Ds1 Fractional Group; Rs-232-Like Mib Group Objects; Number Of Rs-232-Like Ports Object; General Port Table Objects - Paradyne 7110 User Manual

MIB Descriptions

DS1 Fractional Group

RS-232-Like MIB Group Objects

Number of RS-232-Like Ports Object

General Port Table Objects

C-24
The DS1 Fractional Group consists of the DS1 fractional table. This table
(dsx1FracTable) is fully supported by the DSU/CSU and allows DS0 (time slots)
to be mapped between the network interface and the data port. The DSU/CSU
validates all channel configurations before applying them.
Supported for the User Data port, the Management port, and the Terminal port.
RFC 1659 is an SNMPv2 MIB, but is converted to an SNMPv1 MIB to support
this unit. This MIB consists of one object and five tables.
Supported as documented in the RFC.
The General Port Table Objects contains configuration options for the
RS-232-Like interfaces. Clarification for objects contained in this table as it
applies to the unit is provided below.
Table C-11. General Port Table Objects (1 of 2)
Object, OID, Access
rs232PortType
(rs232PortEntry 2 )
1.3.6.1.2.1.10.33.2.1.2
read-only
rs232PortInSigNumber
(rs232PortEntry 3 )
1.3.6.1.2.1.10.33.2.1.3
read-only
rs232PortOutSigNumber
(rs232PortEntry 4 )
1.3.6.1.2.1.10.33.2.1.4
read-only
June 1997
Description
Identifies the port hardware
type.
Contains the number of
input signals (in the input
signal table) that can be
detected.
Contains the number of
output signals (in the output
signal table) that can be
asserted.
Setting/Contents
Supports only the following
values:
rs232(2) – Identifies the
Management port and
Terminal port.
v35(5) – Identifies the
synchronous User Data port
which is compatible with the
V.35 standard.
The value is 2 for synchronous
user data port and 0 for both
the Management port and
Terminal port.
The value is 3 for synchronous
User Data port and 0 for both
the Management port and
Terminal port.
7110-A2-GB20-00