Paradyne 7110 SNMP T1 Benefits

7110 SNMP
T1/FT1 DSU/CSU
B E N E F I T S
• SIMPLE TO INSTALL AND SETUP USING
EASY-TO-FOLLOW INSTRUCTIONS
• STANDARD INTERFACE CONNECTORS FOR
DATA EQUIPMENT, NETWORK MANAGE-
MENT AND TERMINAL PORTS
• MANAGED BY PARADYNE'S DCE
MANAGER AND PERFORMANCE WIZARD™
SNMP APPLICATIONS
• MANAGEMENT AND DIAGNOSTICS TO A
REMOTE SITE WITHOUT DEPENDENCY ON
THE ROUTER VIA FDL. THIS PROVIDES THE
ABILITY TO TEST THE T1 CIRCUIT AND THE
7110 DSU/CSU EVEN IF THE ROUTER IS
NOT FUNCTIONAL.
• MULTIPLE MANAGEMENT METHODS
(ASCII, TELNET, IN-BAND, OUT-OF-BAND)
OFFERS FLEXIBILITY TO MATCH INSTALLA-
TION AND APPLICATION REQUIREMENTS
• FULL NETWORK, DIAGNOSTIC, AND
MANAGEMENT COMPATIBILITY WITH
®
PARADYNE'S ACCULINK 3160 SERIES
DSU/CSUs
• PEACE OF MIND KNOWING YOU HAVE
SELECTED ONE OF THE MOST RELIABLE
T1 SNMP DSU/CSUs IN THE INDUSTRY
E
conomical, reliable transportation for application data traffic is provided by Paradyne's 7110 SNMP
T1/Fractional T1 DSU/CSU, making today's network manager worry free. State-of-the-art design is ideal
for today's standards-based management networks, providing a single V.35 DTE port for data applications
and two EIA-232 ports for SNMP management and ASCII setup. The 7110 supports Facility Data Link (FDL) for
non-disruptive, in-band SNMP management over T1 networks and provides SNMP management over Fractional
T1 and Frame Relay networks with a connection from the 7110 management port to a remote router AUX port or
external LAN adapter.
T1 NETWORK APPLICATION
The 7110 supports Facility Data Link (FDL) for
in-band SNMP management of remote 7110
DSU/CSUs. The FDL supported in the 7110 is
fully compatible with Paradyne's 3160/3164
DSU/CSUs. The in-band management over the
T1 circuit eliminates the need for a manage-
ment connection at the remote site. This saves
the cost of an additional router port or the cost
of an external LAN adapter at the distant end.
FRAME RELAY NETWORK
APPLICATION
The 7110 DSU/CSU is a natural fit in Frame
Relay networks. Remote management is
provided through a router AUX port or an
external LAN adapter. The 7110 presents a
very cost effective option for high-speed
access over Frame Relay networks. The unit
offers SNMP management for maximizing
network availability on mission-critical
applications.
• Single V.35 DTE Connector
• Facility Data Link (FDL) for In-Band Management
• Embedded SNMP Agent
7110 DSU/CSU
• TELNET/ASCII Support
T1 Leased Line
Router
Digital Data
Network
7110 DSU/CSU
CENTRAL SITE
DCE
Manager
• Embedded SNMP Agent
• SLIP/PPP Management Port
• TELNET/ASCII Support
7110 DSU/CSU
T1 Access
Router
Frame Relay
Network
7110 DSU/CSU
CENTRAL SITE
DCE
Manager
REMOTE SITE
Router
T1 Facility
Management
DTE Cable
REMOTE SITE
Router
DDS Facility
Diagnostics
DTE Cable