Paradyne 7110 User Manual page 83

Configuration Option Tables
A-8
Table A-3. Cross Connect Assignments (2 of 2)
Synchronous Data Port Assignments
Available Settings:N01, N02, ..., N24
P( x ), P( x ), ..., P( x )
Default Setting: all DS0's assigned to data port
Designates the assignment of DS0 channels connected to the synchronous data port.
There are three rows in the assignment table. In each row, the top line displays
channels (DS0's) for the network interface. The bottom line displays what whether that
DS0 is available (unassigned) or connected to the synchronous data port. If connected
to the synchronous data port, the value of P(x) specifies the assignment method used
for the connection:
Value Meaning
P(A) This DS0 channel is allocated to the synchronous data port using
the ACAMI method.
P(B) This DS0 channel is allocated to the synchronous data port using
the Block method.
P(C) This DS0 channel is allocated to the synchronous data port using
Channel method.
June 1997 7110-A2-GB20-00