Extension To Interface Table (Ifxtable) - Paradyne 7110 User Manual

Extension to Interface Table (ifXTable)

This extension contains additional objects for the interface table. Supports only
the following objects.
7110-A2-GB20-00
Table C-3. Extension to Interface Table (ifXTable)
Object, OID, Access Description
ifName (ifXEntry 1)
Provides name of the
interface.
1.3.6.1.2.1.31.1.1.1.1
read-only
ifLinkUpDown- Indicates whether the link is
TrapEnable up or down, or enterprise-
(ifXEntry 14)]
specific traps should be
generated.
1.3.6.1.2.1.31.1.1.1.14
read-write
ifHighSpeed Reflects the ifSpeed setting
(ifXEntry 15) for the interface.
1.3.6.1.2.1.31.1.1.1.15 Supported as a read-only
read-only variable.
ifConnectorPresent Indicates whether there is a
(ifXEntry 17) physical connector for the
interface.
1.3.6.1.2.1.31.1.1.1.17
read-only
June 1997
MIB Descriptions
Setting/Contents
Interface text strings:
Management Port
Terminal Port
Network
Data Port
FDL
Only supports T1 network
and User data port.
SNMP Traps must be
enabled for the unit. See
SNMP Traps Option,
Table A-13.
This object is supported for
the Network T1,
Management Port, and
User Data Port only.
0 – ifSpeed from 0 to
499,999 bps
1 – ifSpeed from 500,000 to
1,499,999 bps
2 – ifSpeed from 1,500,000
to 1, 536,000 bps
true(1) – Will always have
this value for the Network
T1, Management port, and
User Data port.
false(2) –Will always have
this value for the FDL.
C-9