Paradyne 7110 User Manual page 166

N
navigating the screens, 2-5
network
default destination, 8-4
interface cable, E-2
interface options, A-4
interface port location, 1-3
LEDs, 4-12
tests, 5-2
network mgmt link down, status message, 4-4
NMS
dial-in management, 3-8
SNMP access, 7-6
SNMP connectivity, 8-1
SNMP security options, A-26
no test active status message, 4-5
O
objects for MIBs, C-1
OK, LED, 4-11
OOF (out of frame)
LED, 4-12
performance statistic, 4-8
status message, 4-3
options
configuration tables, A-1
configuration worksheets, B-1
P
package checklist. See Start-Up Instructions
Passed, status, 4-4
payload loopback (PLB), 5-4
performance statistics, 4-7
phone number directories, 3-8– 3-9
physical description of DSU/CSU, F-2
pin assignments, E-1
port, LEDs, 4-13
PORT (1– 2) interface, technical specifications, F-2
power input, consumption, F-2
power input connector location, 1-3
power module, F-2
primary clock failed, status message, 4-3
primary clock source, A-4
protocols, link-layer, 1-4
Q
QRSS Test, GL-4
7110-A2-GB20-00
R
rear panel, 1-3
remote line loopback , 5-6
remote send line loopback, 5-6
repeater loopback (RLB), 5-5
RFCs, MIB descriptions, C-1, C-3
RIP (routing information protocol) option, A-15
RJ48C network interface cable, E-2
router, management data, 8-3
routing information protocol. See RIP
RS-232-Like MIB, C-2
RTS, request to send LED, 4-13
RXD, received data LED, 4-13
S
safety instructions. See Start-Up Instructions
saving option changes, 3-4
screens, for user interface, 2-1– 2-6
security, 7-1
self-test results, 4-4
send FT1 sequence test, 5-12
Send Ones configuration option, A-10
send test pattern
data port, 5-13
network, 5-7
send V.54 sequence test, 5-11
SIG, network signal LED, 4-12
SNMP
access, 7-6
features, 1-4
setup traps, 6-3
system entries, 3-1
traps, D-1
SNMP & communication, options, A-22
specifications, environmental, F-1
start-up
ATI, 2-1
instructions. See Document 7110-A2-GN10
status
cross connect, 4-6
indicators on front panel, 1-3
test messages, 4-5
subnet, A-22
IP addresses, 8-1
sync data port options, A-9
system
device name fields, 3-1
LEDs, 4-11
June 1997
Index
IN-3