Interfaces Group - Paradyne 7110 User Manual

MIB Descriptions

Interfaces Group

C-4
The Interfaces Group as defined in RFC 1573 consists of an object indicating the
number of interfaces supported by the unit and an interface table containing an
entry for each interface. Since RFC 1573 is an SNMPv2 MIB, it is converted to
SNMPv1 for support by the unit. The following table provides clarification for
objects contained in the Interfaces group when it is not clear how the object
definition in RFC 1573 is supported by the unit.
Table C-2. Interfaces Group Objects (1 of 5)
Object, OID, Access
ifNumber ( interfaces 1)
1.3.6.1.2.1.2.1
read-only
ifIndex ( ifEntry 1)
1.3.6.1.2.1.2.2.1.1
read-only
ifDescr ( ifEntry 2)
1.3.6.1.2.1.2.2.1.2
read-only
June 1997
Description
Specifies the number of
interfaces for this unit in the
ifTable.
Provides the index to the
interface table ( ifTable ) and
to other tables as well.
When an unsupported
index is entered (e.g., 3 and
5), noSuchName is
returned.
Supplies text for each
Interface:
Management
Terminal
T1 Network
User Data Port
Facility Data Link
Setting/Contents
5
Indexes and values:
1 – Management port
2 – Terminal port
4 – Network (T1) interface
6 – User Data (DTE) port 1
8 – Facility Data Link (FDL)
Text Strings for each interface:
"Management Port;
Paradyne T1 DSU/CSU;
Hardware Version
[ Hardware Revision ]".
"Terminal Port; Paradyne T1
DSU/CSU; Hardware
Version [ Hardware
Revision ]".
"Network T1; Paradyne T1
DSU/CSU; Hardware
Version [ Hardware
Revision ]".
"Data Port; Paradyne T1
DSU/CSU; Hardware
Version [ Hardware
Revision ]".
"Facility Data Link;
Paradyne T1 DSU/CSU;
Hardware Version
[ Hardware Revision ]".
7110-A2-GB20-00