Asynchronous Port Table Objects - Paradyne 7110 User Manual

MIB Descriptions

Asynchronous Port Table Objects

C-26
The Asynchronous Port Table Objects contains an entry for the Management port
when the port is configured for asynchronous operation and for the Terminal port.
For this unit, entries in the table that are counters (rs232AsyncPortEntry 6–8) are
used to collect statistics only and are not supported.
Table C-12. Asynchronous Port Table Objects
Object, OID, Access
rs232AsyncPortBits
(rs232AsyncPortEntry 2 )
1.3.6.1.2.1.10.33.3.1.2
read-write
rs232AsyncPortStopBits
(rs232AsyncPortEntry 3 )
1.3.6.1.2.1.10.33.3.1.3
read-write
rs232AsyncPortParity
(rs232AsyncPortEntry 4 )
1.3.6.1.2.1.10.33.3.1.4
read-write
rs232AsyncPortAuto-
Baud
(rs232AsyncPortEntry 5 )
1.3.6.1.2.1.10.33.3.1.5
read-write
June 1997
Description
Specifies the number of bits
in a character.
Specifies the number of
stop bits supported.
Specifies the type of parity
used by the port.
Specifies the ability to
automatically sense the
input speed of the port.
Setting/Contents
Supports only the following
values:
7 – 7-bit characters
8 – 8-bit characters
Supports only the following
values:
one(1) – One stop bit
two(2) – Two stop bits
Supports only the following
values:
none(1) – No parity bit
odd(2) – Odd parity
even(3) – Even parity
Supports only the following
values:
disabled(2) – Does not
support Autobaud.
7110-A2-GB20-00