Paradyne 7110 User Manual page 124

ICMP Group
The ICMP (Internet Control Management Protocol) Group objects are fully
supported.
TCP Group
The TCP Group objects are fully supported, with the exception of tcpConnState
object, which will be read-only, since deleteTCB (12) is not supported and is the
only value which can be set.
UDP Group
The UDP Group objects are fully supported.
7110-A2-GB20-00
Table C-5. IP Group Objects (3 of 3)
Object, OID, Access Description
ipRouteTable (ip21)
(Continued)
June 1997
MIB Descriptions
Setting/Contents
Objects that are not used by this
unit:
ipRouteMetric2,
ipRouteMetric3,
ipRoutemetric4,
ipRoutemetric5 – Default to
–1.
ipRouteNextHop – Defaults to
0.0.0.0.
Do not specify the following
read-only objects in the Set PDU
used to add a route:
ipRouteProto – Set to
netmgmt(3) by the software.
ipRouteAge – Reflects the
value of the time-to-live for the
route (in seconds). Defaults to
999 (permanent route).
ipRouteInfo – Unused; set to
{0, 0}.
C-13