Ati Access; Effective Access Level - Paradyne 7110 User Manual

Security

ATI Access

Effective Access Level

7-4
Access to the ATI is available through either the Terminal port or a Telnet session.
Access to the ATI through the Terminal port can be limited. Refer to
Options, Table A-5, to:
Enable Login Required.
Assign a Port Access Level of 1, 2, or 3.
The ATI can be accessed remotely through a Telnet Session via either the
Management port or the FDL. The DSU/CSU provides several methods for
limiting access to the ATI through a Telnet session.
Refer to Telnet Session
— Enable Login Required.
— Assign a Telnet Session Access Level of 1, 2, or 3.
— Disable Telnet access completely.
To prevent the Management port and FDL from supporting a Telnet session:
— Set the Port Use option to None or Alarms. Refer to
Options, Table A-6.
— Disable the FDL. Refer to
The effective access level for the ATI is the more restrictive of the following two
access levels: the Port/Session access level and the Access level associated with
the Login ID. For example, if a login ID is created with an Access Level 1 and the
Terminal Port is set for a Port Access Level of 2, the effective access level to the
ATI is 2.
The effective access level determines what functions are accessible, as seen in
Table 7-1.
Table 7-1. Effective Access Levels
ATI Access to Menu Functions
Status
Test
Configuration
Control
June 1997
Options, Table A-8, to:
Network Interface
Effective Effective
Access Level 1 Access Level 2
Read-Only Read-Only
Full Access Full Access
Full Access Read-Only
Full Access No Access
Terminal Port
Management Port
Options, Table A-2.
Effective
Access Level 3
Read-Only
No Access
Read-Only
No Access
7110-A2-GB20-00