Output Signal Table Objects - Paradyne 7110 User Manual

Output Signal Table Objects

The Output Signal Table Objects contains entries for the output signals that can
be asserted by the unit, for the synchronous User Data port. Clarification for
objects contained in this table as it applies to the unit is provided below.
7110-A2-GB20-00
Table C-15. Output Signal Table Objects
Object, OID, Access
rs232OutSigName
(rs232OutSigEntry 2 )
1.3.6.1.2.1.10.33.6.1.2
read-only
rs232OutSigState
(rs232OutSigEntry 3 )
1.3.6.1.2.1.10.33.6.1.3
read-only
rs232OutSigChanges
(rs232OutSigEntry 4 )
1.3.6.1.2.1.10.33.6.1.4
read-only
June 1997
Description
Contains the identification
of a hardware output signal.
Contains the current signal
state.
Indicates the number of
times that a signal has
changed from on to off, or
off to on.
MIB Descriptions
Setting/Contents
Supports only the following
values:
cts(2) – Clear To Send
dsr(3) – Data Set Ready
Supports only the following
values:
on(2) – The signal is asserted.
off(3) – The signal is
deasserted.
Increments the object each
time that the signal is sampled
(every 100 ms) and the signal
state is different from the
previous state.
C-29