Paradyne 7110 User Manual page 145

Standards Compliance for
SNMP Traps
Overview
Trap: authentificationFailure
7110-A2-GB20-00
This section describes the unit's compliance with SNMP standards and any
special operational features for the SNMP traps supported. The unit supports the
following user interface traps, along with several enterprise-specific traps:
authenticationFailure
warmStart
linkUp
linkDown
SNMP Trap Description
authenticationFailure Failed attempts to access
the unit.
There are no
variable-bindings.
June 1997
D
Possible Cause
SNMP message not properly
authenticated.
Three unsuccessful attempts
were made to enter a correct
login/password combination.
IP address security is
enabled, and a message was
received from SNMP manager
whose address was not on the
list of approved managers.
D-1