1. Manuals
  2. Brands
  3. Paradyne Manuals
  4. Network Accessory
  5. 7610
  6. Overview

Paradyne 7610 Overview

Zhone 7610 network-accessory: supplementary guide
Hide thumbs Also See for 7610:
1
2

Advertisement

Table of Contents

See also: User Manual
Model 7610 SNMP DSU
Firmware Update and Errata
Document Number 7610-A2-GK40-00
September 1997
Overview

Port LEDs

7610-A2-GK40-00
TM
This document shows features changed with firmware releases up to
01.05.00 and corrections to the Model 7610 SNMP DSU User's Guide
(7610-A2-GB20-00).
The description of the TXD and RXD LEDs are incorrect in the User's Guide.
TXD – Transmitted Data:
ON
– Receiving all 0s from the DTE.
OFF
– Receiving all 1s from the DTE.
Blinking – User data is being transferred.
RXD – Received Data:
ON
– Sending all 0s to the DTE.
OFF
– Sending all 1s to the DTE.
Blinking – User data is being transferred.
September 1997
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 7610 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Paradyne 7610

Summary of Contents for Paradyne 7610

  • Page 1: Port Leds

    September 1997 Overview This document shows features changed with firmware releases up to 01.05.00 and corrections to the Model 7610 SNMP DSU User’s Guide (7610-A2-GB20-00). Port LEDs The description of the TXD and RXD LEDs are incorrect in the User’s Guide.

  • Page 2: Configuration Options

    During the tests, the timing source is the internal clock. This setting should be used for a LADS secondary timing unit. *7610-A2-GK40-00* The valid rate generated by the DTE must be equal to the LADS line rate minus the configured rate of 1600, 4000, or 8000 bps for the IMC, if enabled.

Table of Contents