Ip Addressing; Selecting An Ip Addressing Scheme - Paradyne 7110 User Manual

IP Addressing

Selecting an IP Addressing Scheme

7110-A2-GB20-00
You can select from many IP addressing schemes to provide SNMP NMS
connectivity. Review the following information in preparation for selecting an
IP addressing scheme.
Assign IP addresses to each DSU/CSU IP interface. Refer to the
Addressing Scheme Examples
When the Routing Information Protocol (RIP) option is set to Proprietary,
IP routing information is automatically passed between interconnected
DSU/CSU's from the network side. Refer to
Table A-6.
However, verify that a route to the subnet(s) is set in the NMS's or local
router's routing table. This equipment will not automatically receive routing
information due to the proprietary protocol.
The gateway to subnet(s) is through the DSU/CSU connected to:
— The LAN using a LAN adapter, or
— A router, terminal server, or NMS via PPP or SLIP link-layer protocols
Each DSU/CSU's routing table supports a maximum of 20 routes, even
though a single route is all that is needed to reach every device on a subnet.
Set a default route for packets not in the routing table.
Any legal host address is allowed for a given subnet; the address choice
within the subnet is completely arbitrary.
June 1997
section.
Management Port
8
IP
Options,
8-1