Snmp Group; Ds1/E1 Mib Group Objects - Paradyne 7110 User Manual

SNMP Group

The SNMP Group objects that apply to a management agent are fully supported.
The following objects apply only to an NMS and return a zero value if accessed.

DS1/E1 MIB Group Objects

Supported for the network T1 interface. The DS1 Near End and DS1 Fractional
Groups are fully supported.
The DS1 Near Group consists of four tables:
All four tables are supported for the T1 network interface. Clarification for objects
contained in the tables as it applies to the unit is provided below.
The DS1 Far End Group is not supported.
7110-A2-GB20-00
snmpInTooBig (snmp 8)
snmpInNoSuchNames (snmp 9)
snmpInBadValues (snmp 10)
snmpInReadOnlys (snmp 11)
snmpInGenErrs (snmp 12)
snmpInGetResponses (snmp 18)
snmpInTraps (snmp 19)
snmpOutGetRequests (snmp 25)
snmpOutGetNexts (snmp 26)
snmpOutSetRequests (snmp 27)
DS1 Configuration, Table C-7
DS1 Current, Table C-8
DS1 Interval, Table C-9
DS1 Total, Table C-10
June 1997
MIB Descriptions
C-15