Paradyne 7110 User Manual page 90

7110-A2-GB20-00
Table A-6. Management Port Options (2 of 3)
Clock Source
Possible Settings: Internal, External
Default Setting: Internal
Specifies internal or external clocking.
Clock Source option appears when Port Type is set to Synchronous.
Internal – Clocking is provided internally.
External – Clocking is provided externally. The Management port is always defined as a
DCE. This option setting forces the Management port to use external transmit clocking
(XTXC or TT) from a connected device (DTE).
Data Rate (Kbps)
Possible Settings: 2.4, 4.8, 9.6, 14.4, 19.2, 28.8, 38.4
Default Setting: 19.2
Specifies the Management port data rate in kbps.
Data Rate (Kbps) option does not appear when Port Type is set to Synchronous
with Clock Source set to External.
2.4 to 38.4 – Selects a Management port data rate from 2.4 to 38.4 kbps.
2.4 kbps and 4.8 kbps only appear when Port Type is set to Asynchronous.
Routing Information Protocol
Possible Settings: None, Proprietary
Default Setting: None
Specifies the routing protocol between devices through the Management port.
Routing Information Protocol appears when Port Use is set for Net Link.
None – No routing protocol; use None when the device connected to the Management
port is not a Model 7110.
Proprietary – Uses proprietary variant of RIP Version 1 to enable the routing of IP
traffic between Paradyne devices.
Character Length
Possible Settings: 7, 8
Default Setting: 8
Specifies the number of bits needed to represent one character.
Character Length option appears when Port Type is set to Asynchronous.
7 or 8 – Sets the bits per character.
Parity
Possible Settings: None, Even, Odd
Default Setting: None
Specifies the Parity on the Management port.
Parity option appears when Port Type is set to Asynchronous.
None – Provides no parity.
Even – Parity is even.
Odd – Parity is odd.
June 1997
Configuration Option Tables
A-15