Snmp & Communication Options Menu; Communication Protocol Options - Paradyne 7110 User Manual

Configuration Option Tables
SNMP & Communication Options Menu

Communication Protocol Options

A-22
The SNMP & Communications Menu includes the following:
Communication Protocol
General SNMP Management
SNMP NMS Security
SNMP Traps Options, Table A-13
To access the Communication Protocol Options screen, follow this menu
selection sequence:
Main Menu Configuration
SNMP & Communication
Table A-10. Communication Protocol Options (1 of 3)
FDL Link IP Address
Possible Settings: 000.000.000.000 – 223.255.255.255, Clear
Default Setting: 000.000.000.000
Specifies the IP address needed to access the DSU/CSU. Since this IP Address is not
bound to a particular port, it can be used for remote access via the FDL management
link.
000.000.000.000 – 223.255.255.255 – Sets the Management port IP address. The
range for the first byte is 000 to 223, with the exception of 127. The range for the
remaining three bytes is 000 to 255.
Clear – Clears the IP address and sets to all zeros.
FDL Link Subnet Mask
Possible Settings: 000.000.000.000 – 255.255.255.255, Clear
Default Setting: 000.000.000.000
Specifies the subnet mask needed to access the DSU/CSU. Since this subnet mask is
not bound to a particular port, it can be used for remote access via the FDL
management link.
000.000.000.000 – 255.255.255.255 – Set the Management port subnet mask. The
range for each byte is 000 to 255.
Clear – Clears the subnet mask and sets to all zeros. When the subnet mask is all
zeros, the device creates a default subnet mask based on the class of IP address:
– Class A defaults to 255.000.000.000
– Class B defaults to 255.255.000.000
– Class C defaults to 255.255.255.000
June 1997
Options, Table A-10
Options, Table A-11
Options, Table A-12
Load Configuration From
Communication Protocol
7110-A2-GB20-00