Snmp Management Capabilities; Mib Support; Supported Link-Layer Protocols - Paradyne 7110 User Manual

About the T1 DSU/CSU

SNMP Management Capabilities

MIB Support

Supported Link-Layer Protocols

1-4
The DSU/CSU supports SNMP Version 1, and has the capability of being
managed by any industry-standard SNMP manager and accessed using SNMP
protocol by external SNMP managers.
The following MIBs are supported:
MIB II (RFC 1213 and RFC 1573) – Defines the general objects for use with
a network management protocol in TCP/IP internets and provides general
information about the DSU/CSU. MIB II is backward-compatible with MIB I.
RS-232-Like MIB (RFC 1659) – Defines objects for managing RS-232-type
interfaces (e.g., V.35, RS-422, RS-423, etc.) and supports synchronous data
ports and management communication ports on the DSU/CSU.
Enterprise MIB – Supports configuration, status, statistics, and tests on the
DDS network interface.
DS1/E1 MIB (RFC1406) – Defines objects for managing DS1 interfaces and
supports the network interface on the DSU/CSU. DS1 Near End Group and
DS1 Fractional Group are supported.
The DSU/CSU supports two link-layer protocols for connection to an external
SNMP manager or network device:
Point-to-Point Protocol (PPP)
Serial Line Internet Protocol (SLIP)
June 1997 7110-A2-GB20-00