Management Port Options - Paradyne 7110 User Manual

Configuration Option Tables

Management Port Options

A-14
Table A-5. Terminal Port Options (3 of 3)
Disconnect Time(minutes)
Possible Settings: range 1 – 60
Default Setting: 5
Number of minutes of inactivity before the ATI session terminates automatically.
Timeout is based on no keyboard activity.
Disconnect Time(minutes) option appears when Inactivity Timeout is enabled.
1 to 60 – The ATI user session is closed after the selected number of minutes.
To access the Management Port Options screen, follow this menu selection
sequence:
Main Menu Configuration
User Interface Management Port
Table A-6. Management Port Options (1 of 3)
Port Use
Possible Settings: Net Link, Alarms, None
Default Setting: Net Link
The Management port provides a choice of functions.
Net Link – The Management port is the network communication link and provides
connectivity to an IP network to support SNMP managers and Telnet sessions.
Alarms – The Management port is dedicated as an alarm port and sends out ASCII
alarm messages.
None – Disables the Management port.
No other fields in this table will appear when set to None.
Port Type
Possible Settings: Asynchronous, Synchronous
Default Setting: Asynchronous
Establishes asynchronous or synchronous communication for the Management port.
Port Type option can be changed only when Port Use is set to Net Link.
Asynchronous – Port set for asynchronous communication.
Asynchronous displays when Port Use is set to Alarms and cannot be changed.
Synchronous – Port set for synchronous communication.
June 1997
Load Configuration From
7110-A2-GB20-00