Device Messages - Paradyne 7110 User Manual

Zhone 7110 network-accessory: user guide
Hide thumbs Also See for 7110:
Table of Contents

Advertisement

Messages and Troubleshooting

Device Messages

6-4
The
Device Messages
in Table 6-1, listed in alphabetical order, may appear in the
messages area at the bottom of the ATI screens.
Table 6-1. Device Messages (1 of 2)
Device Message
What Message Indicates
Cannot Save – no
All of the login IDs being
Login IDs with Access
saved have an access level
Level 1
below Level 1.
Command Complete
Action requested has
successfully completed.
1
Invalid Character ( x )
A nonprintable ASCII
character has been
entered.
Invalid – Data
Network-initiated loopback
Terminal (or Channel)
was in progress when
Initiated Loopback
another selection was
Active
made.
Invalid Password
Login is required and an
incorrect password was
entered; access is denied.
Invalid – [ Test ]
The [test] was already in
Already Active
progress when another
selection was made.
Invalid Test
A loopback or pattern test
Combination
was in progress when Start
was selected to start
another test, or was active
on the same or another
interface when Start was
selected.
Limit of six Login IDs
An attempt to enter a new
reached
login ID was made, and the
limit of six login/password
combinations has been
reached.
No Security Records
Delete was selected from
to Delete
the Administer Login
screen, and no security
records had been defined.
1
x is the character not being accepted.
June 1997
What To Do
Change the access level of at
least one Login ID to Level 1 so
that configuration changes can
be made. (Levels 2 and 3 cannot
make configuration changes.)
Save the Login IDs.
No action needed.
Re-enter information using valid
characters.
No action needed.
Try again.
Contact your system
administrator to verify your
password.
Allow test to continue.
Select another test.
Stop the test.
Wait until other test ends and
message clears.
Abort all tests from the Test
menu screen.
Stop the test from the same
screen the test was started
from.
1. Delete another login/password
combination.
2. Re-enter the new login ID.
No action needed.
Enter a security record.
7110-A2-GB20-00

Advertisement

Table of Contents
loading

Table of Contents