Generic Interface Extension Mib Objects; Generic Interface Test Table Objects - Paradyne 7110 User Manual

MIB Descriptions

Generic Interface Extension MIB Objects

Generic Interface Test Table Objects

C-30
The DSU/CSU only supports the Generic Interface Test Table in the Generic
Interface Extension MIB.
The Generic Interface Test Table Objects are used to access additional tests
(loopbacks and pattern tests) that are not provided in the interface group of
MIB II. Clarification for objects contained in this table as it applies to the unit is
provided below.
Table C-16. Generic Interface Test Table Objects (1 of 3)
Object Description
ifExtnsTestType A control variable used to
(ifExtnsTestEntry start and stop user initiated
4) tests on the interface. The
following tests may be
1.3.6.1.3.6.2.1.4
controlled:
read-write
Monitor QRSS test
pattern on the network
T1 interface
Send QRSS/511 test
pattern on the User Data
Port
Send V.54/FT1 up/down
code to the remote unit
for the User Data Port
Monitor QRSS/511 test
pattern on the User Data
Port
Data Channel and Data
Terminal Loopbacks on
the User Data Port
June 1997
Setting/Contents
The following objects use identifiers
to control tests on the network T1
and User Data port interface:
notest(0 0) – Stops the test in
progress on the network T1 or
User Data port interface.
testMon QRSS (wellKnownTests
3) – Starts a Monitor QRSS test
on the interface.
Continued on next page.
7110-A2-GB20-00