Brüel & Kjær Vibro │ Instruction VC-1800 Series
6
Installation and Operation of VIBROCONTROL 18xx
6.1
General
The setting of the measuring parameters of the VIBROCONTROL 18xx can be carried out with the
Compact Setup software:
•
The setup parameters can be adjusted using the Compact Setup software. Only one device can be
configured at the time.
The measuring parameter setup for channels with accelerometers (CCS) for VIBROCONTROL
1850 or a speed sensor for VIBROCONTROL 1860 is very much similar.
Working Offline with the Configuration Software
NOTE
The configuration software only works correctly if the template file for the respective product is
used.
For offline configuration, load the setup file (.mse) from the CD included with delivery.
•
Load the template file, "product type".mse
© Brüel & Kjær Vibro ● C106834.002 / V06 ●
Technical alterations reserved!
Installation and Operation of VIBROCONTROL
UNRESTRICTED DOCUMENT
EN
18xx
Page 21 of 110