Dual Rate And Exponential - devention DEVO F12E User Handbook Manual

Dual Rate and Exponential
•72
Channel
Position
Dual Rate
Exponential
Cruise Mode
Speed Mode
Thermal Mode
Pos 0
Elevator
Pas 0
100%
Line
Switch
Switch
Switch
Dual Rate and Exponential
8
g
Channel
Position
Dual Rate
Exponential
Cruise Mode
Speed Mode
Thermal Mode
Pos 0
Elevator
Pos 0
100%
Line
Switch
Switch
Switch
cleention
DEVO Fl 2E
Welcome to use the DEVO F12E transmitter
The interface show the items and the channels which are adjustable. Press R or L to change the neutral
point of Servos. The factory default is 0.0%. Press UP or DN to choose desired items. The range as below:
Channel name Adjustment range
D62.5% - U62.5%
Channel name
AUX2
Adjustment range
-62.5% - +62.5% Elevator
R-Aileron R62.5% - L62.5% AUX3 -62.5% - +62.5%
L-Aileron R62.5% - L62.5% AUX4 -62.5% - +62.5%
Rudder R62.5% - L62.5% AUX5 -62.5% - +62.5%
Motor -62.5% - +62.5% AUX6 -62.5% - +62.5%
Flap
D62.5% - U62.5%
AUX7
-62.5% - +62.5%
Press EXT to exit after adjustment finished.
3.4 Dual Rate and Exponential
After this function is set up, it is possible for D/R switches to control the dual rates of elevator, aileron and
rudder, respectively. The setting range is covered from 0% to 125%. Under the help with exponential curve
adjustment, it is possible to make both customized setting and automatic setting. The switch between Dual
rate and Exponential can be performed via pushing or pulling the Flight Mode Lever.
Press ENT to enter Main Menu. Press UP or DN to move navigation mark
to desired item Function Menu. Press ENT to enter Function Menu, press
UP or DN to choose Dual rate and Exponential, Press ENT to enter D/R
and Exponential interface.
(1) Channel selection
Press UP or DN to move navigation mark of Channel, Press R or L to
set up channels containing Elevator, Aileron and Rudder. Choose the
desired channel for setting.
Dual Rate and Exponential
8
g
Pos 0
Channel Elevator
Position Pos 0
Dual Rate
100%
Exponential Line
Cruise Mode Switch
Speed Mode Switch
Thermal Mode Switch
(2) Position selection
Press UP or DN to move navigation mark to desired item Position.
In the manual mode, the function of Dual rate and Exponential
will be executed by the corresponding D/R switch among PosO
and Pos1. Take the item Elevator at channel as an example.
It's possible to shift between PosO and Pos1 via pushing or
pulling the D/R switch.
(4)
Exponential
Press UP or DN to select Exponential item of navigation mark. It's possible
to change Dual Rate and Exponential value in Pos when pressing R or
L to change the value. There are ± 100% and Line three adjustment.
(3) Dual Rate adjustment
Press UP or DN to move the navigation mark to desired item Dual Rate,
press R or L to change the number and then you can change the dual
rate of the position. The factory default setting is 100%.
DEVO Fl 2E — 99