Table of Contents
Advertisement
Slave
Aileron
Throttle
Rudder
Gear
Pitch
Gyro
AUX3
Program Mix 1
Master
Slave
Exponential
Point
Status
Output
Switch
Elevator
Elevator
Off
Point - 1
Active
0%
On
0%
0%
deention
DEVO Fl 2E
Welcome to use the DEVO F12E transmitter
(2.2) Slave channel setting
Press UP or DN to move the navigatioal mark to select Slave option and
press ENT to Slave interface. Press UP or DN to select the desired
channel and press ENT to make a "-ki". Press EXT to be back to Program
Mix1 interface.
(2.3) Exponential Curve
Press UP or DN to choose the setting item of "Exponential" .There are On or Off option when you press the
R or L buttoms. Select On for smooth changes, and Off for changes in the form of fold ling in Exponential
curve, respectively.
(2.4) Point Setting
Press UP or DN to move the navigation mark of Point option. Press R
or L, there are 7 piont options including "Point-L", "Point-1", "Point-2",
"Point-M", "Point-3", "Point -4" and "Point-H". Select the point you want
to set.
Program Mix 1
2
Master
Elevator
Slave
Elevator
Exponential
Off
Point
17=IN
Status
Inhibit
Switch
On
0%
0%
(2.5) Status Setting
(There is no Status options when the piont is Point-L or Point-H) After
selecting the point that you want to set, press UP or DN to move the
navigational mark to Status item. Press R or L, there are two options of
Inhibit and Active. Select Inhibit for unchanging the current amount (the
default setting is Inhibit).
(2.6) output setting
When the Status option is Active, the Output option will be listed.Press UP or DN to move the navigational
mark to Output. Press R or L to increase or decrease, respectively, the output amount. It is possible to reverse
the mix direction by changing the plus or minus sign before the amount. The adjustable range is ±100%.
(2.7) Switch Selection
Press UP or DN to choose the
navigation mark of Switch setting item
and press ENT to enter the select
interface of Switch. It is chosen if the
Switch item is marked with "1, 1 ". After
finished, press EXT to return to the
Program Mix to make other settings
or press EXT once again to exit.
3.15 Monitor
Program Mix 1
Switch
Master
Slave
Exponential
Point
Status
Output
Switch
Elevator
Elevator
Off
Point - 1
Active
0%
0%
0%
V Always On
Normal Mode
Stunt 1
Stunt 2
Stunt 3
Stunt 4
Throttle Hold
ELEV D/R
This function can display the current status and positions of all the channels' outputs, and check the current
working status of each channel.
Monitor
2
Press ENT to enter Main Menu, and then press UP or DN to move the
navigational mark to select Function Menu.Press ENT to enter the Function
Menu and then press UP or DN to select servo Monitor and press ENT
to enter the monitor interface for checking the current working status of
each channel.
Press EXT to exit .
Elevator - 60
Gyro
0
Aileron - 60
AUX3 -100
Throttle L100
AUX4 -100
Rudder R 34
AUX5 -73
Gear + 12
AUX6 +100
Pitch - 59
AUX7 +12
DEVO F1 2E —
43
Advertisement
Table of Contents
