Table of Contents
Advertisement
clXention
DEVO F12 E
Welcome to use the DEVO F12E transmitter
(3) L-Flap/ R-Flap setting
The Flap Dual Channels should be previously set in Wing Type (refer to "2.11 Wing Type").
Press UP or DN to move the Navigation mark to choose "L-Flap or R-Flap" setting options. Press R or L to
change the position of L-Flap or R-Flap with a range of ±100%. It is possible to alter the direction of L-Flap
or R-Flap via changing the letter of "R" or "L" before the amount.
(4) L-Tip Aileron/ R-Tip Aileron setting
The Tip Aileron should be previously set at Wing Type (refer to "2.11 Wing Type").
Press UP or DN to move the Navigation mark to choose "L-Tip Aileron or R-Tip Aileron" setting options. Press
R or L to change the position of L-Tip Aileron or R-Tip Aileron with a range of ±100%. It is possible to alter
the direction of L-Tip Aileron or R-Tip Aileron via changing the letter of "R" or "L" before the amount.
Press EXT to exit after finishing the setting.
3.8 Differential
The flight mode should be previously activated in "Device Select" before using this function (Refer to "2.9
Device Select").
Press ENT to enter Main Menu; Press UP or DN to move the navigation
mark to Function Menu, and press ENT to enter Function Menu. Press
UP or DN to choose Differential and Press ENT to enter Differential
interface. Picture as left:
Differential
Flight Mode
Cruise Mode
Aileron
0%
Rudder
0%
Flap
0%
Tip Aileron
0%
Brake Differe...
0%
(1) Flight Mode setting
Press UP or DN to make the Navigation mark to select "Flight Mode" setting options, press R or L to select
the desired item.
Differential
(2) Aileron differential setting
It is possible to decrease the vibration to the head from reverse direction
in operating aileron.
Press UP or DN to move the Navigation mark to select "Aileron" setting
options, press R or L to increase or decrease, respectively, the value
with a range of ±100%.
Flight Mode
Cruise Mode
Aileron
Rudder
0%
Flap
0%
Tip Aileron
0%
Brake Differe...
0%
(3) Rudder differential setting
In this function, the left or right rudder in V-Tail will produce differential gearshift. V-Tail should be previously
set in Wing Type at Model Menu (refer to "2.11 Wing Type").
Press UP or DN to move the Navigation mark to select "Rudder" setting options, press R or L to increase or
decrease, respectively, the value with a range of ±100%.
(4) Flap differential setting
Flap Dual channels should be previously set at Wing Type in Model Menu (refer to "2.11 Wing Type").
Press UP or DN to move the Navigation mark to select "Flap" setting options, press R or L to increase or
decrease, respectively, the value with a range of ±100%.
(5) Tip Aileron differential setting
Tip Aileron should be previously set at Tip Aileron in Model Menu (refer to "2.11 Wing Type").
Press UP or DN to move the Navigation mark to select "Tip Aileron" setting options, press R or L to increase
or decrease, respectively, the value with a range of ±100%.
DEVO Fl 2E — 102
Advertisement
Table of Contents
