Device Select - devention DEVO F12E User Handbook Manual

ciXention
DEVO F 1 2 E
Welcome to use the DEVO F12E transmitter
Press UP or DN to inhibit channel in navigation mark, and press R to
expand the menu.The channel includes four items: Elevator, Aileron,
Throttle and Rudder. The factory default is Inhibit. Take Elevator for
example.
Stick Position Switch
Off
Switch SPSO SW
Channel Elevator
Position
0%
On Up
Stick Position Switch
Off
Switch SPSO SW
Channel
Position
0%
On Up
Press R or L to choose the Elevator as stick, then Press UP or DN to
move nagivation mark to value of position. It's possible to adjust the stick
position via pressing R or L.
Press UP or DN to navigate the On setting, press R or L to change the direction of the channel stick.
Stick Position Switch
Off
Display of stick position switch status
Switch SPSO SW
Channel Elevator
Moving the stick to make sure that the direction of stick's turn-on or
Position 0%
turn-off position is correct.
On
After finished the setting, press EXT to exit.
2.9 Device select
This setting can help you configure various functional switches, or adjust levers. It includes Flight Main Switch,
Flight Extra Switch, Flight Mode Trim, Throttle Hold Switch, Flap Switch, Flap Trim.
Press ENT to enter Main Menu, press UP or DN to move navigation mark
to select Model menu. Press ENT to enter Model menu. Press UP or DN
to Device select Option. Press ENT to Device select Option interface.
(1) Flight Main Switch:
Press UP or DN to move navigation mark to Flight Main Switch and press
R or L to select the desired switch. The factory default setting is FMOD
switch.
Device Select
2
Flight Main Switch
EMI=
Flight Extra Switch
Inhibit
Flight Mode Trim Common
Throttle Hold Switch
RUDD D/R
(2) Flight Extra Switch:
Press UP or DN to move navigation mark to Flight Extra Switch and press R or L to select the desired switch.
The factory default setting is Inhibit.
(3) Flight Mode Trim
There are two modes: Common and Flight Mode. In Common option, the adjustment parameter, of which
the stick is corresponding to trim, puts an equal effect on all the flight modes.
In Flight Mode, the adjustment parameter,of which the stick is corresponding to trim, puts a respective effect
on the corresponding flight mode. The factory default setting is Common.
Press UP or DN to move navigational mark to Flight Mode Trim, press R or L to select Common or Flight
Mode. The factory default is Common.
(4) Throttle Hold Switch: Refer to (1) Flight Main Switch.
(5) Flap Switch: Refer to (1) Flight Mode Switch.
(6) Flap Trim: Refer to (1) Flight Mode Switch.
After finishing the setting, press EXT to exit.
DEVO F I 2E —56