Customized Fixed Id - devention DEVO F12E User Handbook Manual

Fixed ID
2
Fixed ID
Status Status On
ID Code 129965
ID Code 29965
(Fig. 2)
(Fig. 3)
Fixed ID
g
Fixed ID
Are you sure?
Fixed ID
ID Match
Fixed ID
g
cleUention
Welcome to use the DEVO F12E transmitter
DEVO F12E
(4) Setting for training function channels
Trainee is available to get full or part of flight control power to the aircraft model via setting the training function
channel in the trainer's radio. Below is the setting method:
Press the ENT to enter Main Menu, and then press UP or DN to move the navigational mark to select Function
Menu. Then press ENT to enter the Function Menu and press UP or DN to select "Trainer", then press ENT
to enter the Trainer interface. The available channels are shown below, and the current status of trainer switch
is also shown there.
Trainer switch selection:Press UP or DN to select the switch option;
press R or L to select the switch which you want. It includes right and
left trim.The default setting is Right trim.
Channel selection:Press UP or DN to select the channel option; Press
R or L to select the channel(s) which you want to grant to trainee. The
channel(s) you have selected will be activated as "Active". The channels
which are not granted to trainee will be kept inhibited. The default setting
is "Inhibit".
Press EXT to exit.
Trainer
Switch
Right Trim
Elevator Inhibit
Aileron Inhibit
Throttle Inhibit
Rudder Inhibit
Gear
Inhibit
Pitch Inhibit
Gyro Inhibit
10.0 Customized fixed ID
This setting will bind DEVO F12E with its receiver in a unique corresponding relationship. It will greatly speed
up the time of automatic binding when DEVO F12E powered on.
(1) Setting for fixed ID
The setting for fixed ID should be under the status that automatic ID binding is successfully finished. Below
is the setting method.
Press ENT to enter the main Menu and press UP or DN to move the navigational mark to select Model menu.
Press ENT to enter Model Menu. Press UP or DN to select Fixed ID and press ENT to enter the Fixed ID
setting interface.(Fig. 1)
If you want to activate the fixed ID settings, press R or L to change the status from off to ON. A series of
random digits will be shown below after change to On. (Fig. 2)
Press UP or DN to choose the ID code setting, press R or L to choose the digits,press UP or DN to move to
the next code setting . there are 6 digits can be setted. (Fig. 3)
Fixed ID
g
Status I
(Fig. 1)
Press ENT key after the new ID has been setted. An inquiry interface of "Are you sure?" pop up. "ID Code
Matching ... ..." will be shown after press ENT. After matching, the interface will be returned to Model Menu.
DEVO Fl 2E —14