Table of Contents
Advertisement
Aileron to Rudder Mix
Pos 0
Left
0%
Right
0%
Pos 1
Left
0%
Right
0%
Throttle Stick
Inhibit
Switch
Pos 0
Switch
0 An
© Flight Mode 0
oO
FMOD 1
OO
FMOD 2
© Flight Mode 3
© Flight Mode 4
© Flap Normal
© Flap Midpoint
Elevator to Flap Mix
Pos 0
Up
Down
Pos 1
Up
Down
Throttle Stick
Switch
0%
0%
0%
Inhibit
Pos 0
ciXention
DEVO Fl 2E
Welcome to use the DEVO F12E transmitter
(2) Channel: The setted channels will display in "2.10 Device output" (refer to 2.10 Device Output)
(3) Flight Mode 0
Press "UP or DN" to make the navigation choose the "Flight Mode 0"set, press R or L to increase or decrease
the value.The factory default value is 0%, adjustable range ± 125%.
(4) Flight mode 1, Flight mode 2, Flight mode 3, Flight mode 4 settings refer to "Flight Mode 0".
Press EXT to exit after finished.
3.11 Aileron to Rudder Mix
This function is possible to execute the mix of aileron to rudder, which is controlled by switch.
Press ENT enter to Main menu, press UP or DN to select Function menu.
Aileron to Rudder Mix
Press ENT enter to Function menu. Press UP or DN select Aileron to
Rudder Mix, press ENT to enter Aileron to Rudder Mix setting interface.
(1) Pos 0 Setting leftward setting
Press UP or DN to move the Navigation mark to select "Pos 0 Left" setting
options. Press R or L to change mix value of Rudder when moving the
aileron stick leftward. It is possible to change the mix direction via changing
the plus or minus sign before the value. The adjustable mix is ±125%
(2) Pos 0 Setting rightward setting
Press UP or DN to move the Navigation mark to select "Pos 0 Right" setting options. Press R or L to change
mix value of Rudder when moving the aileron stick rightward. It is possible to change the mix direction via
changing the plus or minus sign before the value. The adjustable mix is ±125%
(3) Pos
1
setting, the setting is same as above.
(4) Throttle stick setting
The switch between Pos 0 and Pos
1
can be realized by setting the position of throttle stick. Press UP or
DN of Throttle Stick to set the position amount of throttle stick. The default setting is Inhibit. The adjustable
range is 0.0-100.0%.
(5) Switch setting
The switch will display the current switch position. Press UP or DN to choose Switch, press ENT to enter
interface of Switch selection, press UP or DN to choose desired item. Press ENT to confirm, the desired item
whose left side will be changed into
"1" from "0". If two or more items
are selected, the item And should
be selected, whose left side should
be changed into "1" from "0". Press
EXT after finished it.
3.12 Elevator to flap mix
This function is used to execute the mix of elevator to flap.
Press ENT enter to main menu, press UP or DN to select function menu. Press ENT to enter to function menu.
Press UP or DN to select Elevator to flap mix, press ENT to enter to Elevator to flap mix setting interface.
Pos 0
Left
Right
0%
Pos 1
Left
0%
Right
0%
Throttle Stick
Inhibit
Switch
Pos 0
(1) Pos 0 UP setting
Press UP or DN to move the navigational mark to select item Pos 0 UP,
press R or L upward mix value of Elevator to flap mix will be changed.
The mix direction will be revised by changing the sign of plus or minus
before the value. The adjustable range is ±125%.
DEVO Fl 2E —72
Advertisement
Table of Contents
