Table of Contents
Advertisement
Slave
Aileron
Flaperon
Rudder
Motor
Flap
Gyro
AUX3
Program Mix 1
Master
Elevator
Slave
Elevator
Pos 0
Up
0%
Down
0%
Pos 1
Up
0%
Down
0%
Offset
0%
Switch
Pos 0
cleention
DEVO Fl 2E
Welcome to use the DEVO F12E transmitter
(2) Slave channel setting
Press UP or DN to move the navigatioal mark to select Slave option and
press ENT to Slave interface. Press UP or DN to select the desired
channel and press ENT to make a "AI". Press EXT to be back to Program
Mix1 interface.
(1.3) Gain setting: Take Elevator at Master as an example.
(1.3.1)
Pos 0 UP:
Mix amount setting when elevator stick moved upward.
Press UP or DN to move the navigational mark to select "Pos 0 Up" item.
Press R or L to increase or decrease, separately, the mix amount. It is
possible to change the mix direction through changing the plus or minus
sign before amount. The adjustable range is ±125%.
(1.3.2) Pos 0 Down:
Mix amount setting when elevator stick moved downward.
Press UP or DN to move the navigational mark to select "Pos 0 Down" item. Press R or L to increase or
decrease, separately, the mix amount. It is possible to change the mix direction through changing the plus
or minus sign before amount. The adjustable range is ±125%.
(1.3.3) Pos 1 Up setting method refer to (1.3.1) Pos 0 Up setting.
(1.3.4) Pos 1 Down setting method refer to (1.3.1) Pos 0 Down setting.
(1.3.5) Offset Setting
This function can make Slave begin to mix through the corresponding Lever switch from a certain point as
the starting point.
Program Mix 1
Master
Slave
Elevator
Elevator
Press UP or DN to move the navigational mark to select "Offset" item.
Pos 0
Up
0%
Press R or L to increase or decrease, separately, the mix amount. It is
Down
0%
possible to change Offset direction through changing the plus or minus
Pos 1
Up
0%
sign before amount. The adjustable range is ±100%.
Down
0%
Offset
0%
Switch
Pos 0
(1.4)
Switch Selection
Press UP or DN to select "Switch". Press ENT to enter Switch interface, press UP or DN to choose desired
item. Press ENT to confirm, the desired item whose left side will be changed into "1" from "0". If two or more
items are selected, the item And should be selected, whose left side should be changed into "1" from "0".
Press EXT after finished it.
Program Mix 1
2
Master
Elevator
Slave
Elevator
Pos 0
Up
0%
Down
0%
Pos 1
Up
0%
Down
0%
Offset
0%
Switch
Pos 0
Switch
0 And
© Cruise Mode
DO
FMOD 1
oO
FMOD 2
10 Launch Mode
© Land Mode
ELEV D/R
▪ AILE D/R
DEVO Fl 2E — 109
Advertisement
Table of Contents
