Wing Type - devention DEVO F12E User Handbook Manual

AUX3
RUDD DM
Active
Device Output
2
Gear GEAR SW
Active
Flap System
System
AUX2 FMOD SW
Gyro
ciXention
DEVO Fl 2E
Welcome to use the DEVO F12E transmitter
(4) AUX3
Press UP or DN to enter the AUX3 interface. Press R or L can change the AUX3 switch. It includes FMOD
SW, MIX SW, ELEV D/R, AILE D/R, RUDD D/R, GEAR SW, SPSO SW, SPS1 SW, SPS2 SW, SPS3 SW,
Left Trim, Right Trim, AUX4 KB, AUX5 KB, AUX6 KB, AUX7 KB. The default setting is RUDD D/R switch.
Press UP or DN to select the Function setting, press R or L to choose
the switch, it inculdes inhibit, Active, Gyro, Govemor, Pitch. The default
setting is Active. You can continue to set other items after finished .
(5) AUX4, AUX5, AUX6, AUX7 settings please refers to the AUX3 settings.
AUX4 default setting is AUX4 KB; AUX5 default setting is AUX5 KB;
AUX6 default setting is AUX6 KB; AUX7 default setting is AUX7 KB.
After finished the setting, press EXT to exit.
2.11 Wing Type
Wing Type is grouped into Nomal, Flaperon, Delta, 4-Aileron and V -Tail.
Press ENT to enter Main Menu, press UP or DN to move navigation mark
to Model Menu. Press ENT to enter Model Menu. Press UP or DN to
choose Wing Type, and press ENT to enter the Wing Type interface.
Press UP or DN to move navigation mark to Wing Type, press R or L to
choose Wing Type. The Wing Type are Nomal, Flaperon, Delta and 4-
Aileron.
(1) Flaperon
Press R or L to choose Flaperon under Wing Type.
Below is the sketch map of Flaperon servos' assignment:
Wing Type
Wing Type Normal
V-Tail Inhibit
Dual Channels Inhibit
Mate Inhibit
Trim Inhibit
Twin Engine Inhibit
Trim Inhibit
Left aileron Right aileron
Connect to the output AUX1 in Receiver Connect to the output AILE in Receiver
(2) Delta
Press R or L to choose Delta in Wing Type.
Below is the sketch map of Delta servos' assignmanet:
Left Aileron Right Aileron
Connect to the output AILE in Receiver Connect to the output ELEV in Receiver
DEVO Fl 2E —5B