Throttle Curve - devention DEVO F12E User Handbook Manual

Throttle Hold
Hold Status
Throttle Hold... RUDD D/R
Hold Position -5.0%
Throttle Stick Inhibit
Display of switch status
Throttle Curve
Warning
All Servos Hold?
Ok Cancel
Throttle Curve
Flight Mode
Exponential
Point
Output
Normal Mode
Off
Point - L
0.0%
0.0% 0.0%
cleUention
DEVO Fl 2E
Welcome to use the DEVO F12E transmitter
Setting method:
Press ENT to enter Main Menu, Press UP or DN to move navigation mark to select Function Menu. Press
ENT to enter Function Menu. Press UP or DN to select Throttle Hold, Press ENT to enter Throttle Hold
interface, as below illustration:
Press R or L to activate Throttle
Hold function, and expansion list
will be shown as Hold status,
Throttle Hold Switch, Hold Position,
Throttle Stick.
Throttle Hold Throttle Hold
Hold Status
Hold Status
Throttle Hold... RUDD D/R
Hold Position -5.0%
Throttle Stick
Inhibit
Off
1) There are two items under Throttle Hold Status: Active and Inhibit. The factory default setting is Inhibit.
(2) Throttle Switch setting
It's invalid for setting, the factory default is RUDD D/R which will be shown in the status item. When the
Throttle Hold switch is on, data under the Throttle Hold can not be amended until Throttle Hold switch to be
off, and the hold status is changed.
3) Hold Position
n the Throttle Hold interface, press UP or DN to make the Navigation mark to choose "Hold Position" setting
options. Press R or L to change data, the minimum value is -20.0%; the maximum value is +50.0%.
(4) Throttle Stick
on the interface Throttle hold, choosing the Throttle Stick by button UP
or DN, press R or L, the expansion list will be shown as Inhibit and Active,
default setting is Inhibit, if turning Active, menu "Cut Position" will be seen,
you can set it by button UP or DN, data changes will be vontrolled by R
or L, the minimum is 0.0% and the maximum is 100.0%.
Press EXT to exit after setting up finished.
3.6 Throttle Curve
Throttle Hold
Off
Hold Status Active
Throttle Hold... RUDD D/R
Hold Position -5.0%
Throttle Stick
Cut Position
0.0%
Throttle curve are adjusted through seven points, which of all the flight modes can be respectively set. The
flight mode include Normal Flight, Stunt 1, Stunt 2, Stunt 3 and Stunt 4 while Flight Modes Extra Switch in
Device Select should be activated(Refer to "2.9 Device Select").
Press ENT to enter main menu, Press UP or DN to move navigation mark to select Function Menu. Press
ENT to enter Function Menu. Press UP
or DN to select Throttle Curve, Press
ENT to enter Throttle Curve interface.
The enquiry dropdown is shown"All
servos hold?" If select OK, all the servos
will be locked at the current status, if
click Cancel, all the servos will be
unlocked at the current status.
DEVO Fl 2E —33