Table of Contents
Advertisement
cleention
DEVO Fl 2E
Welcome to use the DEVO F12E transmitter
(1) Voltage: Show 3 diffferent measured voltage value;
(2) Temperature: Show 4 different measured temperature value;
(3) Rate Sensor: Show 2 different measured RPM value;
(4) GPS image display: in the interface of Sensor View, press DN to go to GPS image display. It will show:
local time, longitude, latitude, altitude, move speed, and battery Volume. If you set the image as the
background, these informations will be seen from the image.
Sensor View
Voltage
Temperature
►5.3V
0°C-4
Alam temperature T1 display
► 11.8V
3°C .1
Alam temperature T2 display
► 0.0V
4°C"
Alam temperature T3 display
4°C-4
Alam temperature T4 display
Rate Sensor
GPS Sensor
0 RPM
12-06-2014'
Local date display
• 0 RPM
08:12:35i
Local time display
Internal: VO power display
Exterior: V1 power display
Exterior: V2 power display
Rate R1 display
Rate R2 display
Battery volume display
Sensor View
Timer display
Altitude display
Longitude display
3.18 Trainer
'00.53
12.1V
302m-4
31m
10.0Km/IT4
104° 15.5123E
22° 06.0902N
Horizontal distance display
Move speed display
Latitude display
Two DEVO F12E transmitters working together can execute the training function to meet the requirements
for the beginner. The setting method is shown as below:
(1) Data copy
First, use the wireless copy function between two DEVO F12E to copy the main transmitter's model data to
the trainee's transmitter, this promise the model data between two transmitters is same. Refer the copy
method to the second part of helicopter "2.4 model wireless copy" and do the following steps:
(2) Linkage
Insert the digital signal wire from the trainer's transmitter into the DSC
socket of the trainee's transmitter. Turn on the transmitter and a linkage
icon will be shown on the boot screen.
01
Model 01 0% 00:00 7
g
Linkage icon at
trainee's DEVO F12E
0 0 0 0 0 0
DEVO F 2E —45
Advertisement
Table of Contents
