Training Function - devention DEVO F12E User Handbook Manual

Turn on the power of the trainer's radio. Find out the trainee's model da a, and then let the trainer's Radio
bind with the aircraft model and fly it normally. Then turn off the powerinsert the other end of the digital signal
wire into the trainer's DEVO F12E, and then turn on its power. A linkage icon will be shown as below:
Digi signs wire
Digital signal wire
Right Trim
+
c1Xention
DEVO Fl 2E
Welcome to use the DEVO F12E transmitter
9.0 Training function
Two DEVO F12E transmitters working together can execute the training function to meet the requirements
for the beginner. The setting method is shown as below:
(1) Data copy
First, use the wireless copy function between two DEVO F12E to copy the main transmitter's model data to
the trainee's transmitter, this promise the model data between two transmitters is same. Refer the copy method
to the second part of helicopter "2.4 model wireless copy" and do the following steps:
(2) Linkage
Insert the digital signal wire from the trainer's transmitter into the DSC
socket of the trainee's transmitter. Turn on the transmitter and a linkage
icon will be shown on the boot screen.
linkage icon
01 ,- 4 Model 01 0% 00:00 % 1
Linkage icon at
trainee's DEVO F12E
0 0 0 0 0 0
Trainer icon
Training status display: when the trainer's icon becomes into "X", the trainee stops flying and the trainer is
working; when the trainer's icon turns into"V", the trainee is flying and the trainer is in leisure.
01 =4 Model 01 0% 00:00i D1 Fa
g
A
Trainee is off and
trainer is working
0 0 0 0 0 0
01 =4 Model 01 0% 00:00Ij1/ Fa
g
Trainee is working
and trainer is off
0 0 0 0 0 0
(3) Usage method
The training switch can be freely switchable between left trim and right trim. The default setting is right trim,
see as the right illustration.
During flight, if the trainer pushes Right Trim once, the linkage
icon will be shown as "V" that means the control right is moved
to the trainee from Trainer. If trainer pushes Right Trim once
again, the linkage icon will be shown as "X" that means the
trainer takes back the control right from the trainee.
DEVO Fl 2E —13