Table of Contents
Advertisement
Dual Rate and Exponential
Channel
Position
Dual Rate
Exponential
Flight Mode 0
Flight Mode 1
Flight Mode 2
Pos 0
Elevator
Pos 0
100%
Line
Switch
Switch
Switch
Dual Rate and Exponential
Channel
Position
Dual Rate
Exponential
Flight Mode 0
Flight Mode 1
Flight Mode 2
Pos 0
Elevator
Pos 0
100%
Switch
Switch
Switch
Dual Rate and Exponential
8
g
Channel
Position
Dual Rate
Exponential
Flight Mode 0
Flight Mode 1
Flight Mode 2
Pos 0
Elevator
Pos 0
100%
Line
WEE P
Switch
Switch
cleention
DEVO Fl 2E
Welcome to use the DEVO F12E transmitter
(1) Channel selection
Press UP or DN to move navigation mark of Channel, Press R or L to set up channels containing Elevator,
Aileron and Rudder. Choose the desired channel for setting.
(2) Position selection
Press UP or DN to move navigation mark to desired item Position.
In the manual mode, the function of Dual rate and Exponential
ELEV D/R
will be executed by the corresponding D/R switch among PosO
and Pos1. Take the item Elevator at channel as an example.
It's possible to shift between PosO and Pos1 via pushing or
pulling the D/R switch.
(3)
Dual Rate adjustment
Press UP or DN to move the navigation mark to desired item Dual Rate,
press R or L to change the number and then you can change the dual
rate of the position. The factory default setting is 100%.
(4) Exponential
Press UP or DN to select Exponential item of navigation mark. It's possible
to change Dual Rate and Exponential value in Pos when pressing R or
L to change the value. There are± 100% and Line three adjustment.
(5) Automatic setting
Under working with Flight Mode, it's possible to switch the dual rate and exponential, which are set in above"(3)
Dual Rate adjustment" and "(4) Exponential adjustment", respectively.
The setttings for Flight Mode 0, Flight Mode 1, Flight Mode
2, Flight Mode 3, Flight Mode 4 are available.
Note: If want to use this function, it is necessary to previously
set both "Flight Main Switch" and "Flight Extra Switch" at
Device Select in Model Menu as the corresponding switches.
Refer to "2.9 Device Select".
(5.1) Flight Mode 0 setting:
Press UP or DN in the navigation mark of Dual rate and Exponential to
select the desired item Flight Mode 0. Press R or L to set the position
and the Switch. Only the D/R switch control is valid When Switch is
selected, under the Flight Mode, it's possible for Pos to switch the dual
rate and exponential, which are set in above(3) and (4)Exponential
adjustment. The settings for Swtich, PosO, Pos1, Pos2 , Pos3, Pos4 are
valid.
(5.2) The setting for Flight Mode 1, Flight Mode 2, Flight Mode 3, Flight
above Flight Mode 0 Setting.
Press EXT to exit after finishing the setting.
Mode 4 can be set up according to
3.5 Throttle Hold
If this function is set, the switch will be exectuted by hold switch. The setting value of throttle hold is ranged
from -20.0-50.0%. the default setting is Inhibit.
DEVO Fl 2E —65
Advertisement
Table of Contents
