Table of Contents
Advertisement
Program Mix 1
Master
Slave
Pos 0
Up
Down
Pos 1
Up
Down
Offset
Throttle Stick
Elevator
Elevator
0%
0%
0%
0%
0%
Inhibit
Program Mix 1
Master
Slave
Pos 0
Up
Down
Pos 1
Up
Down
Offset
Throttle Stick
Elevator
Elevator
0%
0%
0%
0%
0%
Inhibit
Program Mix 1
•
2
Slave
Pos 0
Up
Down
Pos 1
Up
Down
Offset
Throttle Stick
Switch
Elevator
0%
0%
0%
0%
0%
Inhibit
Pos 0
Switch
• 2
0
And
1
0 Flight Mode 0
OO
FMOD 1
oO
FMOD 2
© Flight Mode 3
© Flight Mode 4
© Flap Normal
Flap Midpoint
d
eUention
Welcome to use the DEVO F12E transmitter
DEVO Fl 2E
(2) Slave channel setting
Slave
Press UP or DN to move the navigatioal mark to select Slave option and
press ENT to Slave interface. Press UP or DN to select the desired
channel and press ENT to make a "-4". Press EXT to be back to Program
Mix1 interface.
(1.3) Gain setting: Take Elevator at Master as an example.
(1.3.2)
Pos 0 Down:
Mix amount setting when elevator stick moved downward.
Press UP or DN to move the navigational mark to select "Pos 0 Down" item. Press R or L to increase or
decrease, separately, the mix amount. It is possible to reverse mix direction through changing the plus or
minus sign before amount. The adjustable range is ±125%.
Program Mix 1
Master
Elevator
Slave
Elevator
Pos 0
Up
Down
0%
Pos 1
Up
0%
Down
0%
Offset
0%
Throttle Stick
Inhibit
(1.3.1) Pos 0 UP:
Mix amount setting when elevator stick moved upward.
Press UP or DN to move the navigational mark to select "Pos 0 Up" item.
Press R or L to increase or decrease, separately, the mix amount. It is
possible to reverse mix direction through changing the plus or minus sign
before amount. The adjustable range is ±125%.
Aileron
Throttle
Rudder
Gear
Flap
Gyro
AUX3
(1.3.3) Pos 1 Up setting method refer to (1.3.1) Pos 0 Up setting.
(1.3.4) Pos 1 Down setting method refer to (1.3.2) Pos 0 Down setting.
(1.3.5) Offset Setting
This function can make Slave begin to mix through the corresponding
Lever switch from a certain point as the starting point.
Press UP or DN to move the navigational mark to select "Offset" item.
Press R or L to increase or decrease, separately, the mix amount. It is
possible to reverse Offset direction through changing the plus or minus
sign before amount. The adjustable range is ±100%.
(1.4) Throtte Stick
The switch between Pos 0 and Pos 1 can be realized by setting the
position of throttle stick. Press UP or DN to make navigation mark to
select "throttle stick" setting, press R or L to change the value or inhabit.
Change value can set throttle stick postion.The default setting is "inhabit".
The adjustable range is from 0.0% to 100.0%
(1.5) Switch Selection
When the item Throttle Stick is set in Inhibit, it is possible to switch between Pos 0 and Pos 1 by Switch.
Press UP or DN to select "Switch". Press ENT to enter Switch interface press UP or DN to choose desired
item. Press ENT to confirm, the
desired item whose left side will be
changed into "1" from "0". If two or
more items are selected, the item
And should be selected, whose left
side should be changed into "1" from
"0". Press EXT after finished it.
DEVO Fl 2E —78
Advertisement
Table of Contents
