Table of Contents
Advertisement
Program Mix 1
2
Master
Slave
Up
Down
Up
Down
Offset
Switch
Pos 0
Pos 1
la==
Elevator
0%
0%
0%
0%
0%
Pos 0
Program Mix 1
2
Warning
All Servos Hold?
Ok
Cancel
cleUention
DEVO F 1 2 E
Welcome to use the DEVO F12E transmitter
(3) Brake to Spoiler setting
Press UP or DN to move the Navigation mark to select "Pos 0" in the Brake to Spoiler setting interface. The
brake mix at PosO will be altered through pressing R or L to change the value. The adjustable value is 0.0-
100.0%, and the default setting is 100.0%
Brake System
Spoiler Stick
100.0%
Switch
Pos 0
Spoiler
Pos 0
Pos 1
100.0%
Press UP or DN to move the Navigation mark to select "Pos 1" in
the Brake to Spoiler setting interface. The brake mix at Pos1 will be
altered through pressing R or L to change the value. The adjustable
value is 0.0-100.0%, and the default setting is 100.0%
(4) Brake to Flaperon setting
The setting is same as above. It is possible to change the mix direction through changing the plus or minus
sign before the value. The adjustable value is ±125%, and the default setting is 0%.
(5) Brake to Elevator: The setting is same as above.
(6) Brake to Flap: The setting is same as above.
(7) Brake to Tip Aileron: The setting is same as above.
After finishing the set, press EXT to exit.
3.18 Program mix
There are 8 series of program mix, mix channels and values are adjustable.
Setting Method:
Press ENT enter to Main Menu. Press UP or DN select function, press
ENT to enter function menu, then press UP or DN select "Program Mix".
And press ENT to program Mix setting and current status (default setting
is "Inhibit") interface. Press R or L to choose Inhibit, Normal or Curve.
Take "program mix 1" for example, there are "Normal" and "Curve" setting.
(1) The "Normal" setting of "program mix"
Program Mix
Program Mix 1
V Inhibit
Normal
Curve
Program Mix 2
V Inhibit
Normal
Curve
Press UP or DN select the "Normal"setting, Press ENT button then pop up "All Servos Hold?" Press R or L
to choose OK or Cancel. If "OK
selected, all the servos will be locked
in the current status, if "Cancel"
selected, all servos are unlocked.
Press ENT enter to Program Mix 1
setting interface.
Master
V
Elevator
(1.1) Master channel setting
Press UP or DN to move the navigatioal mark to select Master option
and press ENT to Master interface. Press UP or DN to select the desired
channel and press ENT to make a "4". Press EXT to be back to Program
Mix 1 interface.
Aileron
Flaperon
Rudder
Motor
Flap
AUX2
AUX3
DEVO Fl 2E — 108
Advertisement
Table of Contents
