Table of Contents
Advertisement
clelknlion
DEVO Fl 2E
Welcome to use the DEVO F12E transmitter
(3) Strictly obey the order of TURN-ON and TURN-OFF before operation. When starting your flight, turn on
your DEVO F12E first, and connect the battery to the aircraft last. When turning off the aircraft, disconnect
the battery first, and turn off your DEVO F12E last. An upset in the order may cause your aircraft out of
control. Cultivate a correct habit of turn-on and turn-off.
(4) Ensure whether the directions and actions of all the servos in your RC aircraft are correct when executing
commands of the transmitter. Using broken servos will result in unforeseen dangers.
2.0 Features
2.1 Transmitter DEVO F12E
(1) The DEVO F12E adopts 2.4 GHz Direct Sequence Spread Spectrum (DSSS) technology and features
automatic ID binding and ID assignment. It can also be customizedly set as fixed ID code.
(2) USB online update makes you always enjoy the latest program.
(3) Hi-frequency output power is adjustable.
(4) Wireless data transmission between two DEVO F12E helps experience the training function.
(5) Up to 15-model data can be saved.
(6) DEVO F12E adjusting the gyro sensitivity makes hovering flight and fancy flight in an easy way.
(7) Shape design accords with human engineering and provides comfortable holding.
(8) Both the length and tension of the sticks can be amendable.
(9) DEVO F12E can be freely switched among Modes 1, 2, 3, and 4.
(10) DEVO F12E is suitable for Helicopter , Airplane and Glider. In the helicopter mode, there are three
flight modes, each of which can be freely set and its parameters can be personalizedly adjusted to
meet the requirement for F3C or 3D aerobatic flight.
2.2 Features of DEVO-RX1202
(1) Adopts 2.4GHz Direct Sequence Spread Spectrum (DSSS) that features fast reaction and strong anti-
jamming protection.
(2) Double receiving circuits and signal switch automatically effectively assure the stability of receiving signal.
(3) The single chip Microco as CPU provides super-strong analyzing ability.
(4) The receiver maintains the frequency and the ID memories when its changing a new battery pack with
the transmitter powered on .
(5) It can be customizedly set as fixed ID and automatic ID assignment.
3.0 Specification
I
3.1 DEVO F12E transmifter Specification
• Encoder
• Frequency
• Output power
• Current drain
• Power supply
• Output pulse
3.2 Receiver specification
12-channel micro computer system
2.4GHz DSSS
100 mW
Close the video <300mA (100mW); View the video <430mA (100mW)
LiPo 7.4v/11.1v 1,600 - 3,000mAh or 5# Battery 8 X1.5V or NiMH 8 X1.2V 1,600 - 3,000mAh
1000 — 2000US (1500U5 Neutral)
• Type
2.4GHz 12 channels
• Sensitivity
105 dbm
• Frequency interval
> 4 M
• Weight
15 g
• Dimension
47X32X16mm
• Receiver Battery
4.8-6V 1,300mAh
DEVO Fl 2E —7
Advertisement
Table of Contents
